 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www.hamlin.com 55505 Flange Mount Hall Effect Geartooth Sensor Features * Ferrous target sensing * Internal circuit protection * Protection against severe and automotive environments * Self adjusting magnetic range * Automotive grade circuit protection * High speed operation * Short circuit and reverse voltage protection * On board 10 bit A/D convertor Benefits * No chopper delay * Rotational alignment to target not critical * Immune to target run out Applications * Wheel, transmission and camshaft speed sensing * Gear tooth sensor * Rotary encoders * Industrial * Commercial * Automotive DIMENSIONS (in) mm (1.630) 41,40 (1.250) 31,75 BLOCK DIAGRAM VDD Pin 3 (Red) (.866) 22,00 (.236) 6,00 (.197) 5,00 R1 Rpu Table 1 +/(.393) 10,00 (.250) 6,35 Nom Hall Plate C1 Switch Comparator Clock Output C2 (.260) o6,60 (.703) o17,86 (.937) o23,80 (.638) o16,20 GND Pin 1 (Black) (W/B*) OUT Pin 2 *White with Black Stripe SPECIFICATIONS SPECIFICATIONS Hall Type Supply Voltage Supply Voltage Supply Voltage Output High Voltage Output Low Voltage Output Current (continuously on) Current Consumption Current Consumption Switching Speed Temperature Temperature Operating Storage Operate Overvoltage Protection Reverse Voltage Protection Vdc Vdc-max. Vdc-max. Vdc Vdc-max. mA-max. mA-max. mA-max. kHz-max. oC oC Digital Switch 3 Wire (Voltage Output) 4.75 to 24 27 -25 VDD -2 (sinking output with internal pull-up) 0.6 @ 20mA 20 1 10.5 15 -40 to +125 -65 to + 125 APPLICATION EXAMPLE - Geartooth Sensor CUSTOMER OPTIONS - Cable Length and Termination TABLE 1 Cable Length Options:(Cable Type 20 AWG Type TXL per SAE J-1128) SELECT OPTION DESCRIPTION TABLE 2 Termination Options:- .197 (5mm) Max. SELECT OPTION LENGTH mm A Tinned leads 01 02 (3,94) 100 (11,81) 300 (19,69) 500 (29,53) 750 (39,37) 1000 C Molex MX 150 B Deutsch DTM04-3P Typical Output 03 04 05 ORDERING INFORMATION 55505 59036 Series 55505 Cable Length Termination Hamlin USA Hamlin UK Hamlin Germany Hamectrol France Tel: Tel: Tel: Tel: 00 XX X T Table 1 Table 2 +1 920 648 3000 * Fax: +1 920 648 3001 * Email: sales.us@hamlin.com +44 (0)1379 649700 * Fax: +44 (0)1379 649702 * Email: sales.uk@hamlin.com +49 (0) 6142 923920 * Fax: +49 (0) 6142 923921 * Email: sales.de@hamlin.com +33(0) 1 6047 3000 * Fax: +33(0) 1 6015 9136 * Email: sales.fr@hamlin.com Issue No: A C Date: 08.01.09 DCR B6063 INFORMATION PROVIDED ON THIS DATA SHEET IS PROVIDED FOR INFORMATION PURPOSES ONLY AND SHOULD NOT BE RELIED UPON AS BEING ACCURATE FOR ANY PARTICULAR PURPOSE. Product performance may be affected by the application to which the product is put. Upon request, HAMLIN will assist purchasers by providing information specific to any particular application. HAMLIN disclaims any and all liability whatsoever for any purchaser's reliance upon the information contained on this data sheet without further consultation with authorised representatives of HAMLIN. |
Price & Availability of 55505-02-A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |